Happy St Patricks Day – and what better way to celebrate than with a 10% discount in both of my ETSY shops for the remainder of March!
Use coupon code StPats2017 in either shop for some great green finds or anything else for that matter!
Here’s a little teaser:
and from my supplies shop
Happy St Patricks Day and happy savings!!
The firing schedule is really busy at the moment in the studio due to my ceramic classes and also my own art work …. so I am firing the kiln today, mostly with student works, plus a few of my own artworks.
But my attention today has been in the kitchen – it is that time of year again!
An abundance of produce has meant preserving – so today’s efforts involved squash relish and fermented cucumbers.
We enjoyed a sample of the relish on tonight’s dinner – zucchini (from the garden) and corn patties accompanied by said relish! It was so good…
I wont be able to sample the cucumbers for a week as they need to ferment – but i’m sure they will be yummo!
The other cool thing about having a vegetable garden are the pumpkin and zucchini leaves which leave a great impression on clay. These plates have a pumpkin leaf impressed into the surface which has been highlighted with black copper oxide and finished with a clear glaze. I am pretty happy with them, even though one cracked! I will be making more, and will have to do so in the next month before the plants die off as Winter approaches.
So until next week – have fun! But hopefully I post before then!
Happy Sunday everyone!
Last Sunday I shared with you some bowls I was making as a custom order from my ETSY shop which was to be a wedding present. I said I would post an image of the bowls mid-week….. but life just got too busy and I didn’t 😦
However, here is a pic now! I was happy with the bowls, their uniformity and the finished glazed product which strengthened the uniformity of the set further. The bowls were sent on Wednesday with loads of bubble wrap, so I hope the newly wedded recipients love them too!
As far as today goes, I have FINALLY gotten around to glazing the pumpkin plate sets I made almost a year ago – I know it was this long ago because they were made with last years pumpkin leaves from the garden.
Hopefully – all things being equal – these plates will be finished in time for the BOAAmerch Showroom opening this coming Friday night.
I also listed a pumpkin plate in my ETSY shop tonight which I made during the same time last year – I had listed one a few months ago, and this is another in a different glaze. I think it looks pretty cool! The glaze is ovenproof, microwave proof and dishwasher safe, making it ideal for everyday use as a serving plate and for warming up and cooking food!
Well, that’s about it for today’s studio visit – hopefully see you midweek!
During the week hubby broke a wine glass (again) and blamed the dishwasher (again). It seemed a shame to throw away yet another glass so I decided to have a bit of fun.
About a week prior hubby had also broken a hanging terrarium in the bathroom. I had salvaged the cactus and moss and stones and had them stored in a plastic bag. So I decided to cut down the broken wine glass and create a mini succulent garden!
I cut the glass using a diamond rotary cutting tool on my dremel. Then I smoothed down the rough edges with silicone carbide paper in varying textures, finishing with the finest.
While the edges were smooth and not sharp they were a bit uneven – it was the first time I had used the dremel in this way. So I applied some copper foil used for leadlighting to the edge.
Next I planted my rescued cactus and moss, and planted a cutting of succulent from my garden. I think it looks pretty cool!
I find it important to recycle and reuse as much as possible, especially in the current political state of climate change scepticism.
I also consider it important because as a ceramic artist I do use alot of gas, water and electricity. My clay and glaze ingredients have a large carbon footprint also, in terms of miles travelled and mining.
I try as much as possible to offset this footprint by growing as much food as possible, composting waste, not using chemicals when cleaning, being a vegetarian, and of cause recycling as much as possible.
Apart from that I am also firing the kiln today. The kiln contains the set of custom bowls I posted about last week and some student works. Tomorrow I will be glazing the bowls and reloading the kiln for glaze firing. Hopefully all will be on track to post the order on Tuesday.
All going to plan I will post a pic of the finish bowls on Tuesday before I package them up.
Until then, have a great week!
Happy Sunday!! Since making, firing and installing my exhibition in ContainArt last week I have not been in the studio much. We finally have some consistent nice weather here in Ballarat, after a miserable Winter, so the plan is to finally finish the deck – a year later!! The delay has been a combination of aforementioned weather and also some ongoing health problems I have been having over the Winter and into Spring…. I am finally starting to come good, but have the occasional relapse for a couple of days. So annoying!
Anyway, I have spent the weekend oiling slats for the deck railing and hubby has been putting them up (under supervision – lol). So, it looks like we will have our deck finished this summer – yay!!
Apart from that i will take this opportunity to remind you that Valentines Day is only one month away – February 14th. And, of course, I have lots of gift ideas in my ETSY shop for both him and her – jewellery, homewares, and of course custom orders are always welcome 🙂
I’ll leave you with some gift inspiration – have a great week 🙂
Hope everyone is having a great week 🙂
It has been very warm over the past few weeks, so it was great that the day I chose to do the firing was only a 26C day… but, of course, we still needed a beer by the end of it (or maybe before the end of it!)
I have since installed the exhibition, but am a bit behind in my posts because – yes – I am still sick!! It comes and goes in waves and is driving me crazy!!
Anyways…. here are some pics of the pit firing, and the next post will be pics of the installed exhibition…. so stay tuned 🙂
Evening all – I hope everyone had a great Christmas & New Year 🙂
I have mostly recovered from my stretch if illness which made it difficult for me to keep up to date on the blog posts, so hopefully I will be a bit more regular this year!
Today I have been making new sculpture for an exhibition I am having in ContainArt which I am installing on the 11th January – YES, it is going to be a rush!! With having being ill and then indulging in Christmas festivities I couldn’t get to making any earlier.
I’m hoping to pit fire some of the pieces and it is fire restrictions time in Australia so I have to apply for a permit – hopefully that comes through OK.
The exhibition will consist of ceramic sculpture and photography – but no more information…. all will be revealed after the installation 🙂
But here’s a sneak peek at today’s making fun…. have a great week everyone 🙂
What a busy Sunday this has been!
This morning I worked with the community from Scotsburn and surrounds as part of the ongoing bushfire relief project – of which you can see previous posts HERE. And then this afternoon I ran a workshop for the Ballarat branch of Yellow Ladybugs – a group that connects girl with autism – its been a great day!!
The Scotsburn group continue to create some fab ceramics – with a concentration on Christmas decorations this session. The bushfire occurred a week before Christmas in 2015, so there were lots of positive messages inscribed onto the decorations.
And there were also some creative additions – all to be exhibited in the end of the year exhibition to coincide with the anniversary picnic in December.
In the afternoon the Ladybug girls produced some amazing treasure boxes – they so enjoyed it, and so did I !!!
I have been very busy this past month, with catching up after being ill for a while (Winter/Spring bugs), and also quite a few custom orders. So yesterday (Sunday) I was very busy, therefore I am writing this a day late.
In my last Sunday studio visit post I showed you a picture of the 200 snow flakes I was glazing for a custom order I received through my ETSY shop. Well, the glazing is finally all done, and now I am threading ribbon through them all for hanging!! What a job!
Besides that order, I also am working on custom orders for some focal beads, some champagne flutes and a coffee cup.
Overall its been a very busy October with lots of orders and purchases coming through my Etsy shop …. here’s a few of the items that have found new homes this month – some within Australia and some overseas.
And of course there is always the customary kiln firing – this firing is full of students works, plus the custom champagne flutes.
Well, that’s about all I have time for – back to snow flake threading!
As readers may know I am somewhat a specialist in pit firing, having explored it extensively during my PhD and then writing a book about it which you can find on lots of online book stores such as AMAZON.
Lately I have been yearning to explore more methods of alternative firing. The idea arose when my pugmill decided to die leaving me with lots of clay I haven’t had time to manually reclaim. So I thought I would make an outdoor clay kiln – this is still in the planning stage, and I hope to get it up and running (so that it is ‘fired’) before fire restrictions come in this year.
In the meantime I decided to use some of this excess clay – mainly from buckets under the potters wheels which has a high water content – and experiment with a TeePee firing. I did the firing a couple of weeks ago, but hadn’t had time to post it till now – it seems to be very busy at the moment!
I am lucky enough to live on a 10 acre property with lots of trees, and it has been a windy year so there are lots of blown down branches scattered around. I began by constructing my TeePee using these branches and then lining it with fence palings which I reclaimed from a neighbour a few months ago. Before lining the TeePee though, I constructed a tripod with smaller branches within the TeePee which included seeweed, cow dung, salt and some copper sulphate and nestled my pots into it.
I had previously made a series of pinch pots which were were prepared using string and copper wire wound around the pots to hold on seaweed, gumleaves and cow dung.
After lining the TeePee with fence palings I dipped newspaper – in two or three layers for strength – into clay slip, which I had made by using my glaze drill to mix the clay in the potters wheel slag buckets. I then lined the TeePee with this paper making sure I left I left two holes for lighting the fire and a few draft holes to feed the fire. I also left a hole in the top of the TeePee for drawing.
The firing was really fun to do and visually splendid and I was very happy with the result for a first effort and intend to experiment with this technique more.
And here are the finished pots cleaned and polished 🙂
Pot One – when the paper slip fires it creates an almost low fire sculpture, so I rescued some shards the following morning and experimented 🙂
Pot Two – love these colours!
Pot Three – great copper wire markings here!
Pot Four – love the subtlety ….